Sunday, April 16, 2017

Time Event  
15:00 - 19:00 Welcoming / Registration (Hall - Conference center Hotel SEMIRAMIS)  

Monday, April 17, 2017

Time Event  
08:30 - 10:00 Welcoming / Registration (Hall - Conference center Hotel SEMIRAMIS)  
10:00 - 10:40 Opening Ceremony (Room AGADIR at Hotel SEMIRAMIS) - Conference chairs  
10:40 - 11:20 Hemodynamics and vascular diseases: Application to intracranial aneuryms (Room AGADIR at Hotel SEMIRAMIS) - Pr. M.D. Loïc BOUSSEL, University hospital « La Croix-Rousse », CREATIS laboratory, France
 
11:20 - 12:00 Tribology of Atomically Thin (2D) Materials (Room AGADIR at Hotel SEMIRAMIS) - Pr. Tobin FILLETER, University of Toronto, Canada
 
12:00 - 14:00 Lunch (Restaurant - Hotel SEMIRAMIS)  
14:00 - 15:40 Tribology in transport 1 (Room AGADIR at Hotel SEMIRAMIS) - Noël BRUNETIERE  
14:00 - 14:20 › Valvetrain test stand for fuel efficient engine lubricant developments - Frédéric Jarnias, TOTAL Marketing Services, France  
14:20 - 14:40 › An Overview of Challenges and Opportunities in the Modeling and Simulation of Refrigerant-Lubricated Gas Foil Bearings - Tim Leister, Contact and Structure Mechanics Laboratory, Institute of Engineering Mechanics  
14:40 - 15:00 › Testing wet clutch: Friction behaviour on pin on disc test rig - Youssef Bouayach, Institut Pprime  
15:00 - 15:20 › Long-Term Skid Resistance of Asphalt Surfacings: correlation between Wehner-Schulze friction values and the mineralogical composition of the aggregates - Malal Kane, Institut Français des Sciences et Technologiques des Transports, de l'Aménagement et des Réseaux / Département Aménagement, Mobilités et Environnement  
15:20 - 15:40 › RESEARCH STATUS AND DEVELOPMENT OF POWDER METALLURGY FRICTION MATERIAIS IN CHINA - PINGPING YAO, State Key Laboratory of Powder Metallurgy, Central South University  
14:00 - 15:40 Tribology in industry 1 (Room FES at Hotel SEMIRAMIS) - Fatima BOUYAHIA  
14:00 - 14:20 › Tribological Behaviour of Some Polyamides Against Polymer Counterparts - ahmet ozel, a ozel  
14:20 - 14:40 › STUDIED OF SLIDING FRICTION OF THE STEEL / STEEL COUPLE UNDER MAGNETIC FIELD - amirat mohamed, amirat  
14:40 - 15:00 › MODELING EHD LUBRICATION IN TRANSIENT CONDITION: THE EFFECT OF LIP MOTION ON ROTARY LIP SEAL PERFORMANCE - Imane Lahjouji, Ecole nationale supérieure d'art et metiers - M'hammed EL GADARI, Ecole nationale supérieure d'art et metiers - Mohammed Radouani, Ecole nationale supérieure d'art et metiers  
15:00 - 15:20 › Mechanical and Tribological Friction and Wear Properties of SiC-TiB2 and TaC Ceramic –Ceramic composites - Mohammad Farooq Wani, Tribology Laboratory, Mechanical Engineering Department, National Institute of Technology Srinagar, Hazratbal, Srinagar, Kashmir – 190006, J&K (India)  
15:20 - 15:40 › Lubrication of Point EHL Contacts of Solids with Functionally Graded Coatings - Ilya I. Kudish, Sergey Aizikovich, Kettering University  
15:40 - 16:00 Break (Garden at Hotel SEMIRAMIS)  
16:00 - 17:40 Tribology in transport 2 (Room AGADIR at Hotel SEMIRAMIS) - Michel FILLON  
16:00 - 16:20 › Tribology of James Webb Space Telescope's NIRSpec Micro Shutter Assembly Mechanism - Iqbal Shareef, Bradley University - Timothy Krantz, National Aeronautics Space Administration  
16:20 - 16:40 › SELF-LUBRICATING COMPOSITE BEARINGS: Describing the tribological behaviour of the self-lubricating material by DEM modelling - Maria Daniela Villavicencio, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], CENTRE NATIONAL D'ÉTUDES SPATIALES  
16:40 - 17:00 › DEVELOPMENT OF BIO-LUBRICANT FROM BANANA PEEL WASTE - Nor Azmmi Masripan, UNIVERSITI TEKNIKAL MALAYSIA MELAKA  
17:00 - 17:20 › EFFECT OF SLIDING SPEED ON THE LASER SURFACE TEXTURING OF PKAC-E COMPOSITE UNDER LUBRICATED CONDITION - Noreffendy Tamaldin, Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka  
17:20 - 17:40 › ON THE RELATION BETWEEN PHASE TRANSFORMATION AND FRICTIONAL STABILITY OF PKAC-E COMPOSITE DURING DRY SLIDING UNDER DIFFERENT LOADS - Mohd Fadzli bin Abdollah, Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka  
16:00 - 17:40 Tribology in industry 2 (Room FES at Hotel SEMIRAMIS) - Aurélien SAULOT  
16:00 - 16:20 › Numerical Study of a Misaligned Mechanical Face Seal under Axial and Transverse Vibrations - Jeremy Cochain, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI  
16:20 - 16:40 › ABRASION RESISTANCE OF ADDITIVE MANUFACTURED MARAGING STEEL - Amilcar Ramalho, CEMUC, Mechanical Engineering Department, University of Coimbra  
16:40 - 17:00 › Efficiency of spiral groove with different depths on the lubrication of face seals for liquid applications - Mathieu Rouillon, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI  

Tuesday, April 18, 2017

Time Event  
08:30 - 09:10 Method of Dimensionality Reduction in Contact Mechanics: A Simple Engineering Tool for Applications to Complex Geometries and Gradient Materials (Room MARRAKESH at ENSA (multipurpose room)) - Pr. Dr. V. Popov, Technische Universität Berlin, Deutschland
 
09:20 - 10:20 Tribology in industry (Room CASABLANCA at ENSA (room 107)) - Abdeljalil JOURANI  
09:20 - 09:40 › Tribological behavior of XNBR rubber filled with Graphene nanoparticles under dry sliding conditions - Imen SMAOUI, Ecole Nationale d'Ingénieurs de Sfax, Laboratoire des Systèmes Electromécaniques, Ecole Nationale Supérieure de Mécanique et des Microtechniques, Laboratoire FEMTO-ST/Département Méc'Appli - Mohamed Kharrat, Laboratoire des Systèmes Electromécaniques, Ecole Nationale d'Ingénieurs de Sfax  
09:40 - 10:00 › THE EFFECT OF THE TEXTURED SHAFT ON HYDRAULIC ROD SEAL PERFORMANCES - M EL GADARI, Ecole Nationale Supérieure d'Arts et Métiers [Meknes]  
10:00 - 10:20 › Verification of Exfoliation of DLC Films Deposited on Engineered Steel Substrates - Ali Elwafi  
09:20 - 10:20 Multi-scale & multi-physics modeling in tribology 1 (Room MARRAKESH at ENSA (multipurpose room)) - Valentin POPOV  
09:20 - 09:40 › ROTATIONAL VISCOSITY EFFECT OF FERROFLUID ON FINITE JOURNAL BEARING: NEW MODEL OF REYNOLDS EQUATION - Salem Laghrabli, Faculty of Sciences and Techniques, Hassan II University of Casablanca  
09:40 - 10:00 › Multi-scale modelling of minutely vibrating point-contacts - Fabian Schwack, Institute of Machine Design and Tribology  
10:00 - 10:20 › A hybrid numerical and analytical method for multi-regimes lubrication problems - Noël BRUNETIERE, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI  
09:20 - 10:20 Bio-Materials & Smart-tribology (Room TANGER at ENSA (room 109)) - Malal KANE  
09:20 - 09:40 › Grasper Force Control of SMA based Air Cooled Actuator for Laparoscopic Surgical Device - Mithat Can Özin, Istanbul Technical University  
09:40 - 10:00 › THE ROLE OF RELATIVE HUMIDITY ON SKIN MICRO-WRINKLE FORMATION - Georges Limbert, University of Southampton (Southampton, UK), University of Cape Town (Cape Town, South Africa)  
10:00 - 10:20 › Characterization of the aortic arch behavior and CFD simulations validated with 4D cardiovascular MRI - Marine Menut, Laboratoire de Mécanique des Contacts et des Structures  
10:20 - 10:40 Break (Garden at ENSA)  
10:40 - 12:00 Tribology in industry 4 (Room CASABLANCA at ENSA (room 107)) - Pascal JOLLY  
10:40 - 11:00 › WEAR EXPERIMENT OF ROLLING BALLS IN SLIDING-ROLLING CONDITIONS - Xuejin Shen, Research Institue of Bearings, Shanghai University  
11:00 - 11:20 › EXPERIMENTAL STUDY OF A SCRATCHED JOURNAL BEARING - JEAN BOUYER, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI  
11:20 - 11:40 › WEAR PERFORMANCE ANALYSIS OF HIGH-SPEED INSTRUMENT ROTOR BEARINGS - Xiaoyang Chen, Research Institue of Bearings, Shanghai University  
11:40 - 12:00 › INVERSE IDENTIFICATION OF JOHNSON-COOK PARAMETERS OF TIN AND TIALN COATINGS USING THREE-POINT BENDING TEST: MODELLING AND EXPERIMENTS - Amir Bahri, Matériaux et environnement  
10:40 - 12:20 Nano-scale tribology (Room MARRAKESH at ENSA (multipurpose room)) - Tobin FILLETER  
10:40 - 11:00 › Study of the Influence of Filler Content on the Tribological Performance of Epoxy Composites - abdullah mimaroglu, Dr  
11:00 - 11:20 › STUDY OF THE POLYPROPYLENE BEHAVIOR ON A LOCAL SCALE USING THE NANO-INDENTATION TECHNIQUE - Ahcene Mokhtari, Research Center in Industrial Technologies  
11:20 - 11:40 › Measuring the Adhesion Force of Soft Tissue-Laparoscopic Grasper Using a Tactile Sensor - Mithat Can Özin, Istanbul Technical University  
11:40 - 12:00 › Influence of Test Conditions on the Tribological Performance of Nano Filler Epoxy Composites - huseyin unal, Dr  
12:00 - 12:20 › Nano-Tribological Friction and Wear Characteristics of AlCrn/VN/TiN Nano-Layered Coatings - Mohammad Farooq Wani, Tribology Laboratory, Mechanical Engineering Department, National Institute of Technology Srinagar, Hazratbal, Srinagar, Kashmir – 190006, J&K (India)  
10:40 - 12:20 Bio-Mechanics 1 (Room TANGER at ENSA (room 109)) - John TICHY  
10:40 - 11:00 › SURFACE PARAMETERS DETERMINING THE TRIBOLOGICAL PERFORMANCE OF CARTILAGE TISSUE IN OSTEOCHONDRAL AUTOLOGOUS TRANSPLANTATION - Hakan Göcerler, AC2T research GmbH  
11:00 - 11:20 › ZINC OXIDE COATED PLASTIC MESHES AS POSSIBLE METAL PLATE REPLACEMENT IN WATER ELECTROLYSIS SYSTEM - muhammad zulfattah bin zakaria, Universiti Teknikal Malaysia Melaka  
11:20 - 11:40 › COMBINED EFFECTS OF COUPLE STRESS AND POROELASTICITY ON SQUEEZE FILM: MULTI-SCALES APPROACH - Ory Serge Tanguy GBEHE, Faculty of Sciences and Techniques Mohammedia, Hassan II University of Casablanca  
12:20 - 14:00 Lunch (Restaurant - Hotel SEMIRAMIS)  
14:00 - 15:20 Tribology in industry 5 (Room CASABLANCA at ENSA (room 107)) - Wolfgang SEEMANN  
14:00 - 14:20 › THERMAL WEAR SENSING SYSTEM: EXPERIMENTAL PROOF OF THE CONCEPT - Mohamed Mahdi SAKKA, ENIS  
14:20 - 14:40 › PERFORMANCE IMPROVEMENT OF ROTATING MACHINERIES BY VIBRATION ANALYSIS: CASE STUDY OF MOROCCAN CEMENT PLANT - Fouad BOUGHOU, Faculté des sciences ben m'sik Université Hassan II  
14:40 - 15:00 › Influence of surface micro-geometry on RCF: a numerical approach with a microstructure representative model - Guillaume VOUAILLAT, Safran Transmission System, Matériaux, ingénierie et sciences, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]  
15:00 - 15:20 › THEORETICAL AND NUMERICAL STUDY OF THE EFFECT OF POLLUTED OIL ON THE STABILITY OF HYDRODYNAMIC JOURNAL BEARINGS OF ROTATING MACHINES - hamid BOUCHERIT, Université 8 mai 1945, Guelma, BP 401, Guelma (24000), Algérie  
14:00 - 15:20 Local and global contact measurements 1 (Room MARRAKESH at ENSA (multipurpose room)) - Jean BOUYER  
14:00 - 14:20 › EXPERIMENTAL AND NUMERICAL ANALYSIS ON FRICTION INDUCED VIBRATIONS: SLIDING VELOCITY, LOAD AND ROUGHNESS EFFECTS - Mariano Di Bartolomeo, University  
14:20 - 14:40 › The influence of cable diameter on the contact temperature of power automotive connector - AMINE BELOUFA  
14:40 - 15:00 › FRICTIONAL INSTABILITIES AS SYNERGY BETWEEN CONTACT BEHAVIOUR AND VIBRATIONAL RESPONSE - Davide TONAZZI, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], Università degli Studi di Roma "La Sapienza" [Rome]  
15:00 - 15:20 › VALIDATION OF A NUMERICAL FRICTION LAW FOR REPRODUCING FRICTION INDUCED VIBRATIONS OF ROUGH SURFACES - Giovanna Lacerra, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], Dipartimento d' Ingegneria Meccanica e Aerospaziale, University of Rome La Sapienza  
14:00 - 15:20 Bio-Mechanics 2 (Room TANGER at ENSA (room 109)) - Loïc BOUSSEL  
14:00 - 14:20 › A homogenization approach for a poroelastic study: application to cortical bone - Eleonore Perrin, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]  
14:20 - 14:40 › FLUID STRUCTURE INTERACTION COMPUTATIONAL MODEL FOR THE CAROTID ARTERY - Lina Zouggari, Dipartimento di Ingegneria Meccanica e Aerospaziale- Università della Sapienza di Roma, Laboratoire de Mécanique des Contacts et des Structures  
14:40 - 15:00 › Bio-tribocorrosion analysis of additive manufactured biocompatible 316L stainless steel - Johan Stendal, Norwegian University of Science and Technology - NTNU (NORWAY)  
15:00 - 15:20 › Mechanical characterization of bovine cortical bone with the finite element method based inverse method - Djamel Remache, Interdisciplinary Group in Osteo-articular and Cardio-vascular Biomechanics, Institute of Movement Sciences  
15:20 - 16:00 POSTER Session & Coffee break (Garden at ENSA)  
15:20 - 15:20 › A new test rig for performance evaluation of hydrodynamic journal bearings under industrial conditions - jolly pascal, Institut Pprime - Bouyer Jean, Institut Pprime  
15:20 - 15:20 › Analysis of Rolling Contact Fatigue on Aeronautic Gears - Guillaume VOUAILLAT, Safran Transmission System, Matériaux, ingénierie et sciences, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]  
15:20 - 15:20 › Combined Effect of Abrasive Particle Size and Microstructure on Friction and Wear Mechanisms of Low Alloy Steel - abdeljalil jourani, Sorbonne Universités, Université de technologie de Compiègne  
15:20 - 15:20 › COMPARATIVE EROSION STUDY OF DIMPLED AND GROOVED TEXTURED AL2O3-13%TIO2 CERAMIC COATINGS - mariyam ghazali, Universiti Kebangsaan Malaysia  
15:20 - 15:20 › Effect of chemical composition and heat treatment on the degradation of manganese steels - Ali HADJI, Foundry Laboratory, Badji Mokhtar University Annaba, BP 12 23000, Annaba Algeria.  
15:20 - 15:20 › Effect of the material of skirt of a piston of an internal combustion engine - MOUNA AMARA, Laboratoire de Mécanique et Energétique  
15:20 - 15:20 › ERGONOMIC INVESTIGATIONS FOR BETTER CONTROL OF INDUSTRIAL RISKS APPLICATION TO THE STEEL INDUSTRY. - HAMDAOUI Raouf, University BADJI Mokhtar of Annaba, Laboratoire des systèmes électromécaniques, Faculté des sciences de l'Ingéniorat,  
15:20 - 15:20 › From the morphological description of the third body to its rheological behavior - Rabii Jaza, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]  
15:20 - 15:20 › HOT DEFORMATION BEHAVIOUR AND MICROSTRUCTURAL EVOLUTION OF TITANIUM ALLOY TA6VFOR BIOMATERIALS - DARSOUNI ABDERRAZEK, Laboratory of Metallurgy and Engineering Materials  
15:20 - 15:20 › Improvement of the mechanical characteristics and wear resistance of a low-alloyed dual phase austempered ductile iron - Mohammed Iliasse BOULIFA, Foundry Laboratory, Faculty of Engineering Sciences, BADJI Mokhtar University Annaba  
15:20 - 15:20 › INFLUENCE OF THE CHARACTERISTICS OF NITRIDED MICROSTRUCTURES ON THE INITIATION OF SURFACE PITS UNDER ROLLING CONTACT FATIGUE - Etienne Bossy, Ecole Catholique d'Arts et Métiers de Lyon, Institut de Recherche Technologique, Matériaux, Métallurgie et Procédés, Matériaux, ingénierie et sciences, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]  
15:20 - 15:20 › MULTI-PHYSICAL CHARACTERIZATION OF CHONDROCYTE CULTURES IN CONTACT WITH DIFFERENT ORTHOPEDIC IMPLANTS BIOMATERIALS - Amira HANNOUN, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]  
15:20 - 15:20 › Multi-scale mechanical characterization of prostate cancer - jihen zouaoui, J.Zouaoui1,2,4, A.M. Trunfio Sfarghiu2 , A. Piednoir3 , O. Maniti1 , L. Brizuela1 , A. Girard-Egrot1 , A. Landoulsi4 , and T. Granjon1  
15:20 - 15:20 › Numerical investigation on the impact of micropitting on gear surface features. - Thomas Touret, Safran Transmission Systems, Ecole Catholique d'Arts et Métiers de Lyon, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]  
15:20 - 15:20 › Study of the hot ductility of microalloyed steel - LAMIA DARSOUNI, Fondery Laboratory  
15:20 - 15:20 › SURFACE MODIFICATION OF POLYDIMETHYLSILOXANE INDUCED PROLIFERATION AND ENDOTHELIAL-LIKE CELLS DIFFERENTIATION OF UMBILICAL CORD BLOOD-DERIVED MESENCHYMAL STEM CELLS - Pinar Huner Omay, Istanbul Bilim University  
15:20 - 15:20 › Thermal modelling of a splash lubricated planetary gear set - Jean-Baptiste Boni, Ecole Catholique d'Arts et Métiers de Lyon  
15:20 - 15:20 › TRIBOLOGICAL CHARACTERIZATION OF TRANSMISSION JOINTS: MECHANICAL FRICTION LOSS EVALUATION AND COMPONENT DURABILITY - Valentin RIPARD, Laboratoire de Tribologie et Dynamique des Systèmes, Laboratoire de Mécanique des Contacts et des Structures  
15:20 - 15:20 › Wear of poly-V belt - jean-louis ligier, Haute Ecole d'Ingénierie et de Gestion du Canton de Vaud  
15:20 - 15:20 › WEAR STUDY OF SUPERMARTENSITIC STAINLESS STEEL 13Cr5Ni2Mo - TLILI Samira, 1Research Center in Industrial Technologies CRTI, P.O.Box 64, Cheraga 16014 Algiers Algeria, University of Badji Mokhtar Annaba, Foundry Laboratory, BP 12 Annaba, Algeria  
16:00 - 17:00 Local and global contact measurements 2 (Room MARRAKESH at ENSA (multipurpose room)) - Francesco MASSI  
16:00 - 16:20 › POLYMER SURFACE FRICTION TRACE MONITORING IN SLIDING CONTACT : ACCORDANCE BETWEEN ELECTROSTATIC POTENTIAL AND THERMAL CARTOGRAPHY - Thami Zeghloul, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI  
16:20 - 16:40 › RELATION BETWEEN SURFACE CONTACT GEOMETRY AND TRIBOCHARGING BEHAVIOR OF SEVERAL POLYMERS - Yopa Eka Prawatya, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI, Department of Industrial Engineering, Tanjungpura University  
16:40 - 17:00 › THE INFLUENCE OF SURFACE ELECTRIC CHARGE DEPOSE ON ABS, PP AND PVC SLABS FOR DROPLETS OF WATER AND TWO DIFFERENT KINDS OF OILS - Marian Bogdan NEAGOE, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI  
16:00 - 17:30 SEMINAR: What medecine for the next century? (Room TANGER at ENSA (room 109)) - Pr. Boumzebra Driss & Pr. M.D. Loïc Boussel & Pr. Benyebka Bou-Saïd  
19:00 - 23:30 Banquet at "Chez Ali"  

Wednesday, April 19, 2017

Time Event  
09:00 - 09:40 Recent advances in modeling and simulation of rotors in oil film bearings (Room MARRAKESH at ENSA (multipurpose room)) - Pr. Dr.-Ing. Wolfgang SEEMANN, Karlsruhe Institute of Technology, Deutschland
 
09:40 - 11:00 Bio-Mimetics (Room CASABLANCA at ENSA (room 107)) - Benyebka BOU-SAÏD  
09:40 - 10:00 › ANALYSIS OF THE IN VITRO TRIBOLOGICAL BEHAVIOR OF UHMWPE: CASE OF UNICOMPARTIMENTAL KNEE REPLACEMENT - Mirela-Maria Sava, Laboratoire de Mécanique des Contacts et des Structures  
10:00 - 10:20 › Tribological expertise for dual mobility hip prosthesis - Ines ESSEFI, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]  
10:20 - 10:40 › BIOMIMETIC TACTILE SENSOR AND TACTILE PERCEPTION MODELING - yilei zhang, nanyang technological university  
09:40 - 11:00 Multi-scale & multi-physics modeling in tribology 2 (Room MARRAKESH at ENSA (multipurpose room)) - Noël BRUNETIERE  
09:40 - 10:00 › Mapping Consideration for The Simulation of Tribological Problems - Mathieu Renouf, Laboratoire de mécanique et génie civil  
10:00 - 10:20 › Numerical simulation of the wear of stone-cutting tools by a Multibody Meshfre Approach - Guilhem Mollon, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne]  
10:20 - 10:40 › Friction Force Estimation of an Elastomeric Pillar In Contact with a Flat Smooth Surface - Turgay Eray, Istanbul Technical University  
10:40 - 11:00 › MODELING SOUND ENERGY HARVESTERS WITH THIN FILM FLUID FORCES - Pr. John A. Tichy  
11:15 - 12:00 Awards & Closure (Room MARRAKESH at ENSA (multipurpose room)) - Conference chairs