|
08:30 - 09:10
|
Method of Dimensionality Reduction in Contact Mechanics: A Simple Engineering Tool for Applications to Complex Geometries and Gradient Materials (Room MARRAKESH at ENSA (multipurpose room)) - Pr. Dr. V. Popov, Technische Universität Berlin, Deutschland |
|
|
09:20 - 10:20
|
Tribology in industry (Room CASABLANCA at ENSA (room 107)) - Abdeljalil JOURANI |
|
| 09:20 - 09:40 |
› Tribological behavior of XNBR rubber filled with Graphene nanoparticles under dry sliding conditions - Imen SMAOUI, Ecole Nationale d'Ingénieurs de Sfax, Laboratoire des Systèmes Electromécaniques, Ecole Nationale Supérieure de Mécanique et des Microtechniques, Laboratoire FEMTO-ST/Département Méc'Appli - Mohamed Kharrat, Laboratoire des Systèmes Electromécaniques, Ecole Nationale d'Ingénieurs de Sfax |
|
| 09:40 - 10:00 |
› THE EFFECT OF THE TEXTURED SHAFT ON HYDRAULIC ROD SEAL PERFORMANCES - M EL GADARI, Ecole Nationale Supérieure d'Arts et Métiers [Meknes] |
|
| 10:00 - 10:20 |
› Verification of Exfoliation of DLC Films Deposited on Engineered Steel Substrates - Ali Elwafi |
|
|
09:20 - 10:20
|
Multi-scale & multi-physics modeling in tribology 1 (Room MARRAKESH at ENSA (multipurpose room)) - Valentin POPOV |
|
| 09:20 - 09:40 |
› ROTATIONAL VISCOSITY EFFECT OF FERROFLUID ON FINITE JOURNAL BEARING: NEW MODEL OF REYNOLDS EQUATION - Salem Laghrabli, Faculty of Sciences and Techniques, Hassan II University of Casablanca |
|
| 09:40 - 10:00 |
› Multi-scale modelling of minutely vibrating point-contacts - Fabian Schwack, Institute of Machine Design and Tribology |
|
| 10:00 - 10:20 |
› A hybrid numerical and analytical method for multi-regimes lubrication problems - Noël BRUNETIERE, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI |
|
|
09:20 - 10:20
|
Bio-Materials & Smart-tribology (Room TANGER at ENSA (room 109)) - Malal KANE |
|
| 09:20 - 09:40 |
› Grasper Force Control of SMA based Air Cooled Actuator for Laparoscopic Surgical Device - Mithat Can Özin, Istanbul Technical University |
|
| 09:40 - 10:00 |
› THE ROLE OF RELATIVE HUMIDITY ON SKIN MICRO-WRINKLE FORMATION - Georges Limbert, University of Southampton (Southampton, UK), University of Cape Town (Cape Town, South Africa) |
|
| 10:00 - 10:20 |
› Characterization of the aortic arch behavior and CFD simulations validated with 4D cardiovascular MRI - Marine Menut, Laboratoire de Mécanique des Contacts et des Structures |
|
|
10:20 - 10:40
|
Break (Garden at ENSA) |
|
|
10:40 - 12:00
|
Tribology in industry 4 (Room CASABLANCA at ENSA (room 107)) - Pascal JOLLY |
|
| 10:40 - 11:00 |
› WEAR EXPERIMENT OF ROLLING BALLS IN SLIDING-ROLLING CONDITIONS - Xuejin Shen, Research Institue of Bearings, Shanghai University |
|
| 11:00 - 11:20 |
› EXPERIMENTAL STUDY OF A SCRATCHED JOURNAL BEARING - JEAN BOUYER, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI |
|
| 11:20 - 11:40 |
› WEAR PERFORMANCE ANALYSIS OF HIGH-SPEED INSTRUMENT ROTOR BEARINGS - Xiaoyang Chen, Research Institue of Bearings, Shanghai University |
|
| 11:40 - 12:00 |
› INVERSE IDENTIFICATION OF JOHNSON-COOK PARAMETERS OF TIN AND TIALN COATINGS USING THREE-POINT BENDING TEST: MODELLING AND EXPERIMENTS - Amir Bahri, Matériaux et environnement |
|
|
10:40 - 12:20
|
Nano-scale tribology (Room MARRAKESH at ENSA (multipurpose room)) - Tobin FILLETER |
|
| 10:40 - 11:00 |
› Study of the Influence of Filler Content on the Tribological Performance of Epoxy Composites - abdullah mimaroglu, Dr |
|
| 11:00 - 11:20 |
› STUDY OF THE POLYPROPYLENE BEHAVIOR ON A LOCAL SCALE USING THE NANO-INDENTATION TECHNIQUE - Ahcene Mokhtari, Research Center in Industrial Technologies |
|
| 11:20 - 11:40 |
› Measuring the Adhesion Force of Soft Tissue-Laparoscopic Grasper Using a Tactile Sensor - Mithat Can Özin, Istanbul Technical University |
|
| 11:40 - 12:00 |
› Influence of Test Conditions on the Tribological Performance of Nano Filler Epoxy Composites - huseyin unal, Dr |
|
| 12:00 - 12:20 |
› Nano-Tribological Friction and Wear Characteristics of AlCrn/VN/TiN Nano-Layered Coatings - Mohammad Farooq Wani, Tribology Laboratory, Mechanical Engineering Department, National Institute of Technology Srinagar, Hazratbal, Srinagar, Kashmir – 190006, J&K (India) |
|
|
10:40 - 12:20
|
Bio-Mechanics 1 (Room TANGER at ENSA (room 109)) - John TICHY |
|
| 10:40 - 11:00 |
› SURFACE PARAMETERS DETERMINING THE TRIBOLOGICAL PERFORMANCE OF CARTILAGE TISSUE IN OSTEOCHONDRAL AUTOLOGOUS TRANSPLANTATION - Hakan Göcerler, AC2T research GmbH |
|
| 11:00 - 11:20 |
› ZINC OXIDE COATED PLASTIC MESHES AS POSSIBLE METAL PLATE REPLACEMENT IN WATER ELECTROLYSIS SYSTEM - muhammad zulfattah bin zakaria, Universiti Teknikal Malaysia Melaka |
|
| 11:20 - 11:40 |
› COMBINED EFFECTS OF COUPLE STRESS AND POROELASTICITY ON SQUEEZE FILM: MULTI-SCALES APPROACH - Ory Serge Tanguy GBEHE, Faculty of Sciences and Techniques Mohammedia, Hassan II University of Casablanca |
|
|
12:20 - 14:00
|
Lunch (Restaurant - Hotel SEMIRAMIS) |
|
|
14:00 - 15:20
|
Tribology in industry 5 (Room CASABLANCA at ENSA (room 107)) - Wolfgang SEEMANN |
|
| 14:00 - 14:20 |
› THERMAL WEAR SENSING SYSTEM: EXPERIMENTAL PROOF OF THE CONCEPT - Mohamed Mahdi SAKKA, ENIS |
|
| 14:20 - 14:40 |
› PERFORMANCE IMPROVEMENT OF ROTATING MACHINERIES BY VIBRATION ANALYSIS: CASE STUDY OF MOROCCAN CEMENT PLANT - Fouad BOUGHOU, Faculté des sciences ben m'sik Université Hassan II |
|
| 14:40 - 15:00 |
› Influence of surface micro-geometry on RCF: a numerical approach with a microstructure representative model - Guillaume VOUAILLAT, Safran Transmission System, Matériaux, ingénierie et sciences, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] |
|
| 15:00 - 15:20 |
› THEORETICAL AND NUMERICAL STUDY OF THE EFFECT OF POLLUTED OIL ON THE STABILITY OF HYDRODYNAMIC JOURNAL BEARINGS OF ROTATING MACHINES - hamid BOUCHERIT, Université 8 mai 1945, Guelma, BP 401, Guelma (24000), Algérie |
|
|
14:00 - 15:20
|
Local and global contact measurements 1 (Room MARRAKESH at ENSA (multipurpose room)) - Jean BOUYER |
|
| 14:00 - 14:20 |
› EXPERIMENTAL AND NUMERICAL ANALYSIS ON FRICTION INDUCED VIBRATIONS: SLIDING VELOCITY, LOAD AND ROUGHNESS EFFECTS - Mariano Di Bartolomeo, University |
|
| 14:20 - 14:40 |
› The influence of cable diameter on the contact temperature of power automotive connector - AMINE BELOUFA |
|
| 14:40 - 15:00 |
› FRICTIONAL INSTABILITIES AS SYNERGY BETWEEN CONTACT BEHAVIOUR AND VIBRATIONAL RESPONSE - Davide TONAZZI, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], Università degli Studi di Roma "La Sapienza" [Rome] |
|
| 15:00 - 15:20 |
› VALIDATION OF A NUMERICAL FRICTION LAW FOR REPRODUCING FRICTION INDUCED VIBRATIONS OF ROUGH SURFACES - Giovanna Lacerra, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne], Dipartimento d' Ingegneria Meccanica e Aerospaziale, University of Rome La Sapienza |
|
|
14:00 - 15:20
|
Bio-Mechanics 2 (Room TANGER at ENSA (room 109)) - Loïc BOUSSEL |
|
| 14:00 - 14:20 |
› A homogenization approach for a poroelastic study: application to cortical bone - Eleonore Perrin, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] |
|
| 14:20 - 14:40 |
› FLUID STRUCTURE INTERACTION COMPUTATIONAL MODEL FOR THE CAROTID ARTERY - Lina Zouggari, Dipartimento di Ingegneria Meccanica e Aerospaziale- Università della Sapienza di Roma, Laboratoire de Mécanique des Contacts et des Structures |
|
| 14:40 - 15:00 |
› Bio-tribocorrosion analysis of additive manufactured biocompatible 316L stainless steel - Johan Stendal, Norwegian University of Science and Technology - NTNU (NORWAY) |
|
| 15:00 - 15:20 |
› Mechanical characterization of bovine cortical bone with the finite element method based inverse method - Djamel Remache, Interdisciplinary Group in Osteo-articular and Cardio-vascular Biomechanics, Institute of Movement Sciences |
|
|
15:20 - 16:00
|
POSTER Session & Coffee break (Garden at ENSA) |
|
| 15:20 - 15:20 |
› A new test rig for performance evaluation of hydrodynamic journal bearings under industrial conditions - jolly pascal, Institut Pprime - Bouyer Jean, Institut Pprime |
|
| 15:20 - 15:20 |
› Analysis of Rolling Contact Fatigue on Aeronautic Gears - Guillaume VOUAILLAT, Safran Transmission System, Matériaux, ingénierie et sciences, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] |
|
| 15:20 - 15:20 |
› Combined Effect of Abrasive Particle Size and Microstructure on Friction and Wear Mechanisms of Low Alloy Steel - abdeljalil jourani, Sorbonne Universités, Université de technologie de Compiègne |
|
| 15:20 - 15:20 |
› COMPARATIVE EROSION STUDY OF DIMPLED AND GROOVED TEXTURED AL2O3-13%TIO2 CERAMIC COATINGS - mariyam ghazali, Universiti Kebangsaan Malaysia |
|
| 15:20 - 15:20 |
› Effect of chemical composition and heat treatment on the degradation of manganese steels - Ali HADJI, Foundry Laboratory, Badji Mokhtar University Annaba, BP 12 23000, Annaba Algeria. |
|
| 15:20 - 15:20 |
› Effect of the material of skirt of a piston of an internal combustion engine - MOUNA AMARA, Laboratoire de Mécanique et Energétique |
|
| 15:20 - 15:20 |
› ERGONOMIC INVESTIGATIONS FOR BETTER CONTROL OF INDUSTRIAL RISKS APPLICATION TO THE STEEL INDUSTRY. - HAMDAOUI Raouf, University BADJI Mokhtar of Annaba, Laboratoire des systèmes électromécaniques, Faculté des sciences de l'Ingéniorat, |
|
| 15:20 - 15:20 |
› From the morphological description of the third body to its rheological behavior - Rabii Jaza, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] |
|
| 15:20 - 15:20 |
› HOT DEFORMATION BEHAVIOUR AND MICROSTRUCTURAL EVOLUTION OF TITANIUM ALLOY TA6VFOR BIOMATERIALS - DARSOUNI ABDERRAZEK, Laboratory of Metallurgy and Engineering Materials |
|
| 15:20 - 15:20 |
› Improvement of the mechanical characteristics and wear resistance of a low-alloyed dual phase austempered ductile iron - Mohammed Iliasse BOULIFA, Foundry Laboratory, Faculty of Engineering Sciences, BADJI Mokhtar University Annaba |
|
| 15:20 - 15:20 |
› INFLUENCE OF THE CHARACTERISTICS OF NITRIDED MICROSTRUCTURES ON THE INITIATION OF SURFACE PITS UNDER ROLLING CONTACT FATIGUE - Etienne Bossy, Ecole Catholique d'Arts et Métiers de Lyon, Institut de Recherche Technologique, Matériaux, Métallurgie et Procédés, Matériaux, ingénierie et sciences, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] |
|
| 15:20 - 15:20 |
› MULTI-PHYSICAL CHARACTERIZATION OF CHONDROCYTE CULTURES IN CONTACT WITH DIFFERENT ORTHOPEDIC IMPLANTS BIOMATERIALS - Amira HANNOUN, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] |
|
| 15:20 - 15:20 |
› Multi-scale mechanical characterization of prostate cancer - jihen zouaoui, J.Zouaoui1,2,4, A.M. Trunfio Sfarghiu2 , A. Piednoir3 , O. Maniti1 , L. Brizuela1 , A. Girard-Egrot1 , A. Landoulsi4 , and T. Granjon1 |
|
| 15:20 - 15:20 |
› Numerical investigation on the impact of micropitting on gear surface features. - Thomas Touret, Safran Transmission Systems, Ecole Catholique d'Arts et Métiers de Lyon, Laboratoire de Mécanique des Contacts et des Structures [Villeurbanne] |
|
| 15:20 - 15:20 |
› Study of the hot ductility of microalloyed steel - LAMIA DARSOUNI, Fondery Laboratory |
|
| 15:20 - 15:20 |
› SURFACE MODIFICATION OF POLYDIMETHYLSILOXANE INDUCED PROLIFERATION AND ENDOTHELIAL-LIKE CELLS DIFFERENTIATION OF UMBILICAL CORD BLOOD-DERIVED MESENCHYMAL STEM CELLS - Pinar Huner Omay, Istanbul Bilim University |
|
| 15:20 - 15:20 |
› Thermal modelling of a splash lubricated planetary gear set - Jean-Baptiste Boni, Ecole Catholique d'Arts et Métiers de Lyon |
|
| 15:20 - 15:20 |
› TRIBOLOGICAL CHARACTERIZATION OF TRANSMISSION JOINTS: MECHANICAL FRICTION LOSS EVALUATION AND COMPONENT DURABILITY - Valentin RIPARD, Laboratoire de Tribologie et Dynamique des Systèmes, Laboratoire de Mécanique des Contacts et des Structures |
|
| 15:20 - 15:20 |
› Wear of poly-V belt - jean-louis ligier, Haute Ecole d'Ingénierie et de Gestion du Canton de Vaud |
|
| 15:20 - 15:20 |
› WEAR STUDY OF SUPERMARTENSITIC STAINLESS STEEL 13Cr5Ni2Mo - TLILI Samira, 1Research Center in Industrial Technologies CRTI, P.O.Box 64, Cheraga 16014 Algiers Algeria, University of Badji Mokhtar Annaba, Foundry Laboratory, BP 12 Annaba, Algeria |
|
|
16:00 - 17:00
|
Local and global contact measurements 2 (Room MARRAKESH at ENSA (multipurpose room)) - Francesco MASSI |
|
| 16:00 - 16:20 |
› POLYMER SURFACE FRICTION TRACE MONITORING IN SLIDING CONTACT : ACCORDANCE BETWEEN ELECTROSTATIC POTENTIAL AND THERMAL CARTOGRAPHY - Thami Zeghloul, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI |
|
| 16:20 - 16:40 |
› RELATION BETWEEN SURFACE CONTACT GEOMETRY AND TRIBOCHARGING BEHAVIOR OF SEVERAL POLYMERS - Yopa Eka Prawatya, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI, Department of Industrial Engineering, Tanjungpura University |
|
| 16:40 - 17:00 |
› THE INFLUENCE OF SURFACE ELECTRIC CHARGE DEPOSE ON ABS, PP AND PVC SLABS FOR DROPLETS OF WATER AND TWO DIFFERENT KINDS OF OILS - Marian Bogdan NEAGOE, Institut P' CNRS - Université de Poitiers - ENSMA UPR 3346 SP2MI |
|
|
16:00 - 17:30
|
SEMINAR: What medecine for the next century? (Room TANGER at ENSA (room 109)) - Pr. Boumzebra Driss & Pr. M.D. Loïc Boussel & Pr. Benyebka Bou-Saïd |
|
|
19:00 - 23:30
|
Banquet at "Chez Ali" |
|
